AIAIAI TMA-2 H01+X01 Wireless+ Upgrade Bundle

Description

H10 and X01 quick start guide

Power on/off

1. On the H10 headband, press and hold the middle button for 3 sec.
2. On the X01 transmitter, press and hold the button for 3 sec.

W+ Link mode

Pairing W+ Link for wireless ultra-low latency and lossless audio:

1. Make sure the slide switch on the H10 headband is set to W+ Link mode (white).
2. On the H10 headband, when powered on, press and hold the top and bottom button for 3 sec to enter pairing mode (LED blinking fast).
3. On the X01 transmitter, when powered on, double press the button to enter pairing mode (LEDs blinking fast).
4. Pairing is successful when the LED on H10 and X01 are both solid white.

Bluetooth mode

Pairing Bluetooth:

1. Make sure the slide switch on H10 headband is set to Bluetooth© mode (blue).
2. On the H10 headband, when powered on, press and hold the top and bottom button for 3 sec to enter pairing mode (LED blinking fast).
3. Activate pairing mode on your connecting device and look for “AIAIAI TMA-2 (H10)”.
4. Pairing is succesful when the LED on the H10 headband is solid blue.

LOW LATENCY

CONNECTION

W+ Link has been specifically developed for wireless audio with ultra-low latency and lossless audio in a stable and robust connection. This unlocks a latency-free wireless experience with TMA-2 Wireless+, designed for enhanced freedom for music making.

W+ Link uses a dedicated radio-frequency band to send audio between the transmitter and headphones, unlike a Bluetooth connection which continuously swaps frequency bands. This ensures the 16ms latency is stable.

The W+ Link is developed with dual antennas to always secure a stable connection without interference from surroundings. With a larger bandwidth than Bluetooth, W+ Link can transmit uncompressed audio, and transmit it multiple times in parallel. This secures a stable signal without drop-outs.